04/14/2021 How to Measure Motor Mechanical Speed, Torque and Power

How to Measure Motor Mechanical Speed, Torque and Power

3-Phase Power and Motors Masters Webinar Series Part Six

Date: Wed, April 14, 2021
Time: 11AM Pacific | 2PM Eastern
Duration: 90 minutes

Register Here 

How to Measure Motor Mechanical Speed, Torque and Power Webinar

3-Phase Power and Motors Masters Webinar Series
Join Teledyne LeCroy for this Learning Lab series on measuring high-power, three-phase and motor inverter and drive systems with an 8-channel high-resolution oscilloscope or motor drive analyzer. Learn about static and dynamic measurements, from AC line to inverter switching, and line outputs to motor mechanical performance.

How to Measure Motor Mechanical Speed, Torque and Power
In this session (Part Six), we focus on how to use the Motor Drive Analyzer to measure motor mechanical shaft speed, torque and angle using a variety of analog, digital and serial data sensors.

Topics to be included:

  • Resolvers and Sin/Cos sensors
  • Quadrature Encoder Interface (QEI)
  • Brushless DC (BLDC) Hall sensors
  • Extracting speed data from CAN serial data
  • Inference/calculation of speed or torque from other acquired data

Register for the rest of the series:

Part One: How to Measure Inverter Dead Times and Input/Output Power
Part Two: How to Perform Static and Dynamic Power Analysis
Part Three: How to Correlate Control Events to Power Events
Part Four: How to Measure Power During Volt-second and Other Short Power Periods
Part Five: How to Perform AC Input and Inverter/Drive Output Harmonic Analysis

Who should attend? Inverter subsection engineers, motor/drive control system engineers, and inverter/drive systems engineers who design dynamic control and power systems that operate under highly controlled conditions.

What attendees will learn? Best in class techniques for measuring and understanding performance of and interrelationships between control and power sections.

Presenter: Stephen Murphy, Teledyne LeCroy Applications Engineer

Can’t attend live? Register anyway, and we will send you the recording and slides afterward.

Pre-work recommended before attending the Learning Lab webinar

It is recommended that you download and register (at no cost) MAUI Studio prior to the start of the Learning Lab, and download LabNotebook (waveform plus setup files) .lnb files (they will be combined into one .zip file that will need extracting).

MAUI Studio
>> https://teledynelecroy.com/mauistudio/

Zip file with .lnb files
>> File will be available before webinar starts

These files will allow you to load the various waveform examples shown during the Learning Lab webinar, and participate in hands-on instruction.

Register Here